Branding & Customization
By DEKO360
By DEKO360
White-label branding, accent colors, and analytics (Creator/Agency plans).
White-Label Branding
Available on the Creator and Agency plans. By default, every published tour shows a small "Powered by DEKO360" badge. On Creator and Agency plans, you can replace or remove it so tours feel fully like your own. Hiding the DEKO360 badge 1. Open your tour in the editor. 2. Click on empty space (no scene selected) so the right-hand panel shows Tour Properties. 3. Under Branding, toggle the Powered by DEKO360 badge switch off. The badge disappears from the tour's public link, and so does the default DEKO360 mark on the nadir patch (see below) unless you've uploaded your own patch logo. (Note: embeds have their own separate Hide the deko360 badge toggle in the embed dialog — same Creator/Agency requirement, set independently. See Embedding Your Tour.) Adding your own logo Instead of just hiding the badge, you can replace it with your own logo: 1. In the same Branding section of Tour Properties, click Upload logo. 2. Choose a JPEG, PNG, or WebP image (up to 5MB). PNG or WebP with a transparent background works best. 3. Your logo now appears in the badge's place on the tour's public link. Use Replace to swap in a different image, or Remove to go back to no logo (and optionally re-enable the default DEKO360 badge). Nadir patch Every scene shows a small branded circle covering the tripod at the bottom of the panorama — the "nadir patch." Its controls are in the same Branding section of Tour Properties. - Nadir patch size — a slider (available on every plan) lets you make this circle bigger or smaller to fully cover the tripod in your specific shots. - Nadir patch logo — on Creator and Agency, you can replace the default DEKO360 mark on that circle with your own logo (JPEG, PNG or WebP, up to 2MB), using the same Replace / Remove controls as the header logo above. - When you hide the badge — the default DEKO360 mark on the patch is hidden too, so no patch is shown. Upload a nadir patch logo if you'd like your own mark there instead. The editor shows a note under the size slider while the patch is hidden. VR images and albums White-labeling also applies to VR images and albums: - In the VR image editor, the Branding section has Hide DEKO360 branding, which removes the "Powered by deko360.com" credit and the DEKO360 patch under the camera, and Custom nadir patch, where you can upload your own logo (JPEG, PNG or WebP, up to 2MB). Both need the Creator or Agency plan. - An album's page shows the DEKO360 badge unless your account is on Creator or Agency. Photos opened from an album follow their own Branding settings. A note on workspaces Branding settings are per-tour, not account-wide — if you manage tours for multiple clients, set each tour's branding individually so every client sees their own look. Organizing tours into one workspace per client can make this easier to keep track of. Related guides - Custom Accent Color - Analytics & Tracking
Custom Accent Color
Available on the Creator and Agency plans. Give a tour your own brand color by recoloring its hotspot markers — instead of the default neutral grey. Setting an accent color 1. Open your tour in the editor. 2. Click on empty space (no scene selected) so the right-hand panel shows Tour Properties. 3. Under Branding, use the Accent Color picker to choose any color you like. The hotspot markers update immediately in the editor preview, and the change applies to the published tour as soon as you save. Resetting to the default color Click Reset to default next to the color picker to remove your color and go back to the standard neutral marker look. What it changes The accent color affects the hotspot markers (the pulsing dot/icon visitors click to move between scenes) on both the editor stage and the live published tour. It also colors the scene markers in the 3D dollhouse view. It doesn't change the color of your uploaded photos or other tour content. Related guides - White-Label Branding - Customizing Hotspot Icons
Analytics & Tracking
Available on the Creator and Agency plans. If you already track your marketing with Google Analytics, Google Tag Manager, or Meta (Facebook) Pixel, you can connect the same tracking to your published tours — so visits to your tour show up in your own reporting and ad campaigns, not just ours. Why this matters A tour lives on its own page (and often gets embedded on portals outside your main website), so your website's usual tracking script doesn't automatically see visits to it. Connecting your own tracking IDs closes that gap — useful for: - Retargeting — build an ad audience of people who viewed a specific property's tour. - Campaign attribution — see which ad or listing drove someone to explore the tour. - Conversion tracking — if you're also using a contact/lead form elsewhere on your site, tie tour engagement back to it. Connecting your tracking IDs 1. Open your tour in the editor. 2. Click on empty space (no scene selected) so the right-hand panel shows Tour Properties. 3. Scroll to Analytics & Tracking. 4. Enter any of the following you use: - Google Analytics measurement ID (format: G-XXXXXXXXXX) - Google Tag Manager container ID (format: GTM-XXXXXXX) - Meta Pixel ID (a numeric ID from your Meta Events Manager) 5. Each field saves as soon as you click away from it. You can find these IDs in your Google Analytics admin settings, your Google Tag Manager workspace, or your Meta Events Manager, respectively. Which one should I use? You want Use Simple visitor stats in Google Google Analytics (GA4) To run Facebook or Instagram ads and retarget visitors Meta Pixel To manage several tags yourself, or your marketing team already uses Tag Manager Google Tag Manager You don't need all three. Pick the one that matches how you already measure your marketing. Step-by-step setup Before you start, make sure your tour is published — tracking only runs on the public tour page, not inside the editor. Google Analytics 1. In Google Analytics, create a GA4 property for your listings or business. 2. Under Admin → Data streams, add a Web stream. 3. Copy the Measurement ID — it looks like G-XXXXXXXXXX. 4. Paste it into Google Analytics measurement ID in the tour's Analytics & Tracking section. 5. Open your public tour link. Within a minute or so you should see yourself under Reports → Realtime in Google Analytics. Meta Pixel 1. In Meta Events Manager, create a Pixel (Connect data sources → Web). 2. Copy the Pixel ID — a number of 10 to 20 digits. 3. Paste it into Meta Pixel ID. 4. Check it with Meta's Pixel Helper Chrome extension on your public tour link. It should report a PageView event. Google Tag Manager 1. In Tag Manager, create a Web container and copy the Container ID (GTM-XXXXXXX). 2. Paste it into Google Tag Manager container ID. 3. Add your tags (for example GA4 or the Meta Pixel) inside the container, then Publish the container — tags don't fire until it's published. 4. Check it with Tag Assistant on your public tour link. Common mistakes - Counting visits twice. If your Tag Manager container already contains a GA4 tag, don't also enter the same GA4 ID in the Google Analytics field. Use one route or the other. - Pasting more than the ID. Enter only the ID itself (G-…, GTM-…, or digits for Meta). Pasting a whole script snippet is rejected. - Expecting full session tracking on embedded tours. If you embed the tour on your own website, tracking runs inside the embedded frame, so a visit isn't connected to your site's own session. For the most accurate numbers, use the direct tour link in your ads and listings. - Expecting to verify the domain. Your tracking IDs work on tours served from deko360.com without any domain verification — Google Analytics, Tag Manager and the Meta Pixel all start collecting once the ID is saved. You can't verify deko360.com itself, so Meta features that require a verified domain, such as some ad-optimization settings, aren't available for it. Check Meta's current requirements in your Events Manager if you run Meta ads. - Expecting scene-level reports. The tracking records when the tour is opened. It doesn't report which scenes people view or which hotspots they click. Removing tracking Clear the field and click away to remove a tracking ID from a tour — this is per-tour, so removing one tour's tracking doesn't affect any others.
MLS Compliance Tools
Available on the Creator and Agency plans. If you share tours alongside MLS or IDX listings, many MLS boards expect two things: broker or agent attribution wherever listing content is displayed, and a way to take a tour out of search results once a listing is no longer active. The MLS Compliance section of the editor covers both. Rules vary by MLS board, so treat it as a helpful starting point and check your board's requirements. Finding the settings Open your tour in the editor. In the right-hand panel, open the MLS Compliance section, below Tour Properties. On the Free and Individual plans the section shows an upgrade prompt instead of the controls. Listing or brokerage attribution Add the line your MLS board requires, such as "Listing courtesy of Jane Doe, ABC Realty". 1. In Listing/brokerage attribution, type the text. It can be up to 200 characters. 2. Click away from the field. It saves automatically. The attribution is shown on the public tour as small text with the tour's title and description. A green check beside the heading means an attribution is set; a warning icon means it's still empty. To remove it, clear the field and click away. Keeping a tour out of Google Once a listing sells or is withdrawn, the tour link may stay live but you may not want it found in search. 1. Under Search engine indexing, turn on Exclude from Google search. The status changes from Indexed to Excluded. 2. Turn it off again to allow indexing. This setting matters for Public tours. Tours set to Private, Password or Specific people are never indexed. See Who Can View Your Tour. Good to know - Both settings apply per tour. Set them on each listing's tour. - Attribution and search settings are separate from White-Label Branding, which controls the DEKO360 badge, logo and nadir patch. - If your account moves back to Free or Individual, you can no longer change these settings. Related guides - Tour Properties - Social Previews & Search Visibility - Who Can View Your Tour